Project: Free Bike.

Caleb and Ben approached me with a radical proposal in November: would I accept the gift of a complete, custom, modern bmx bike, to replace my unreliable-but-unkillable warship built at the peak of the heavy bike trend almost ten years ago?

36 lbs. Details here.

I did not say "Yes" immediately, for a few reasons. Firstly, I was uncomfortable accepting their generosity. My bike's fabulous obsolescence was due financially not to lack of funds, but to my paralyzing aversion to spending--and it didn't seem fair to accept for free what I could honestly afford. Caleb and Ben countered this point by assuring me it would be done at approximately zero expense, just drawing parts from the existing local surplus, since basically any change would amount to an upgrade and a savings in weight. They also pointed out that, furthermore, while I might be able to afford the upgrade (certainly a free one), the true roadblock was my own inertia and lack of time. And they convinced me that they would enjoy the project and the opportunity for an act of service.

After some deliberation, I handed over my bike and what spare parts I had laying around with the instructions to use, keep, sell, or donate it all. I just wanted one complete bike and no more extra parts taking up space in my closets. I resolved to detach completely from all expectations and embrace whatever I received, which was hard at first, but then thrilling. I told Caleb and Ben that the most important thing to me was that they have fun.

I am amazed. Here is the breakdown:

Frame: Caleb's 2004 S&M Stricker, mountless, 20.5"

Before (stream-of-conscious paint pen & sticker job):

After:

Castillo Bars from DBZ. I think the orange spray over maroon is genius.

Redline Device fork. Blue spray over navy. Also genius.

Solid headset, circulating through Caleb's friends since 2003.

Odyssey Griswald grips. I bought these new at Goods and love them. They're the thickest grips I've ever seen. Designed by Ben Ward.

Shadow Attack front-load stem. Caleb did make the disclaimer that he wasn't sure how I would feel about running a Shadow Conspiracy product. He was right to wonder, but I just find it funny, and I like how it resembles the old Death Neck. I think the bolts are hollow.

Profile 180's. So pleased--I secretly hoped Caleb would keep the orange and black.

My old Cielenski pedals.

KMC 510 HX chain. Pieced together from spare links by DBZ. I think it's the chain endorsed by Sean Burns, which makes me feel safe.

Shadow Crowgora sprocket. 30t. Another Shadow product??? Yep, and it's even purple.

Metal Bikes Pivotal seat & post. I think DBZ was going to give these to me out of pity, but he actually made me trade him a pack of Newports for them.

When my Kink Empire was stolen in 2002, I was able to build 90% of a replacement bike out of spare parts from the garage of old riding buddy Dave Brown. That makes this Primo Viking seatpost clamp the oldest part on the bike. Years later I sawzalled it in half.

Front tire: Fit FAF.

Rear Tire: Odyssey Plyte Path.

Rear Wheel: Poverty 48H 10T cassette laced to Alex Supra E-lite.

Front Wheel: Crupi high-flange 3/8 36H laced to no-name single wall. It's a race wheel, so I guess pegs are out of the question. I'm fine with that.

28 lbs. The seat is ever-so-slightly lower than it was previously, and the bars have been pushed forward in line with the fork, and neither is changing. My only plans are to grind down the axles and possibly trim the seat post.

See also: video footage of the new bike, posted last week (via Caleb's blog).

Thank you, Caleb. Thank you, Ben. Thank you.

nostalgic must-reads from the hamilton blog.

A tip of the hat to Defgrip for bringing this to everyone's attention. Stephen Hamilton, after making his personal Youtube debut last month, is now blogging like crazy.

bank to civic!

Well over a hundred frenetic posts in less than a month, many just one line or nonsense poetry. Which is fine.

But don't miss this gem: a copy/pasted email from Ed Docherty, detailing editing choices for the Hamilton's fantastic FederalBikes part, circa 2004. It reads

>Hey,
> There's a rough section on the server. There's still some work to be done
>to it but I thought I'd let you guys check it out to see how we're doing.
> Firstly, there should be the noise of a camera motor drive running over
>the
>photos at the start. I recorded some earlier but it turns out my camera
>didn't capture the audio?!?!? The mic's taped up cause Dean hit it one time
>when Edd borrowed it, so tomorrow I'll try and see if I can get it working
>again.
> Secondly, there's a 2 sec gap near the end. I could make the clips longer
>on each side of the gap to fill it in but it kinda fits well with the
>music.
>I'll figure something out...
> There's a tyre slide on a bench that Steven wants in there but it's
>probably on the tape with the new Corey stuff. We can figure out what to
>drop and replace with that. Maybe the manual to abubaca from Austin?
> Maybe we could chop the front wheel 180 at the end of the line at the
>pier
>in SF to make some room? What do you think?
> There's a kinda subliminal riddle thrown in there. Before the Prague
>pyramid stuff it flashes up - What's round at both ends and high in the
>middle? Then after the clip it flashes up - Ohio. I thought it'd be kinda
>cool cause you'd have to do frame advance on your dvd player to read the
>question. Just some thing different...
> Oh yeah, reasons for some stuff :-
>
>I put the footplant before the manual to nosewheelie up and down in Prague
>cause it kinda fits together - Steven footplants then next clip the kid
>kicks at the camera
>
>I put the rail hop to bank in Austin and the hill bomb together cause the
>music at that part is kinda going down scales. Plus, it's a fairly quiet
>part of the song so you hear the audio on the hill bomb good.
>
> I'm really psyched on the way it's looking.
>
>Here's the info to get to the server...
>
>Address: ftp.backyard-online.com
>User Name: backya
>Password: bobby1
>
>Steven, to upload stuff you might need this program called Fetch. I'll
>attach it to an email and send it to you next.
>
> Alright, let me know what you think.
> >Ed

For the record, I thought it was awesome, Ed.

Click through for the original post. Youtube below. Hamilton video part discography here.

bike check: one, two. one, two.

I know these photos were taken in 2006 or 2007, because that's our old Chicago apartment building. But I can't be surer than that, because 2006 is the last time I bought a bike part. This is exactly the bike I'm riding today, except the rusted spots have continued to bloom.




Frame: Metal Kizz. Apparently this was Jeremy Davis's personal rig for a short time. I paid eighty bucks for it in 2002 (I think), after my Kink Empire was stolen. Most of this bike is the same charity parts, actually. There are temper tantrum hammer dents in the down tube, presumably inflicted during a difficult bottom bracket installation. I may cut the mounts off.

The forks came off a Hoffman Dirty130 complete. Paid twelve bucks. I don't tend to bend forks.

Castillo Bars. I fell in love with low, narrow bars at age sixteen and haven't run two-piecers since the stock bars on my Mongoose Decade. More on the four-piece fascination here.



S&M Redneck. This was originally part of a Holmes custom complete, built in the bike shop where I worked in 1996. The kid never liked the way the bike handled, and he soon quit riding altogether. The stem design is so old that it's not even gyro compatible. Very pointy corners. Blue face plate is from the quill Redneck that I once ran on my 1" Standard Shorty. I'm planning to switch to an Odyssey Elementary at some point.

Profile SS Cranks (bent).

Pedals: Odyssey JC's. I like these a lot.

Chainring: TreeBikeCo 36t. Still straight, even after shearing off the bashguard.

Seat/post/clamp: Mangled GT plastic with the nose cut off. This was the original seat on my Shorty, I think. Unearthed it in a tool box a few years ago. Primo Rod post and Primo Viking two-bolt clamp, cut in half. These parts are the weakest link in my setup, and I hate them. I'm planning to switch to some kind of Pivotal.

gSport Vandal hubs. I never cared the name gSport or Vandal, but I've been passively obsessed with G's products for some time. These hubs have double-thick flanges to resist damage from grinds. A sensible design choice, but I hardly even grind any more. 48 spoke.

Peg: I threw away all my rusty metal pegs a few years ago, in anticipation of Plegs. But I got impatient with Odyssey R&D, and one day when I was in the mood for hang 5's, I dug this ThickBikes plastic peg out of a tool box and installed it. It's been there ever since. When I originally bought these, the shop only had one pair for sale. If they'd had two pairs, I would've taken both. But I never could stand the asymmetric look of two white pegs, so these didn't get used much beyond the first week. If you want to grind aluminum rails, they do work really well. I think I paid $45 for the pair. Crazy. (This photo taken today.)


Tires: Ruben up front (love it), Odyssey Path in back. The Path is comically bald at this point, but I just keep duct taping the inside whenever I find a new thin spot. The technique is so effective that I wish I'd never started.

Rear rim: Sun Big City. I can't believe the durability of this rim, and it has completely eliminated pinch flats. It was originally black but is oxidizing towards a shade of copper. I kinda like it.

Front rim: Hoffman Highroller, from the first batch of Taiwanese Gack wheels, circa 1996. Still somewhat round. I'm not entirely comfortable with the ugliness of the flaking chrome. Whenever a new flake starts to go, it makes a whizzing sound in the wind.

...

On a related note, I recently acquired a good condition Standard Trailboss frame in exchange for a beat-up old Holmes--actually, the very same Holmes the Redneck came from, mentioned above--and I'm contemplating what to do with it. I don't know if I want to switch all these rusty old parts over or just build up a second bike with new modern stuff. I wouldn't mind sacrificing ten pounds of excess metal, and I don't have any kind of artistic or political commitment to old technology, really. But the Kizz just keeps on running, and the accumulated memories just keep growing. I guess that's called nostalgia.

...

Recent, related, excellent items you've probably already seen:

Taj recalls all his bikes
and
Russ recalls all his STA's.

History.

In 2003, Ben edited together a three-minute video of our friends to share online. It was simply titled The Dailygrind Crew, referring to the website he was running at the time. First there was the popup-riddled dailygrind.freeservers.com, and, later, once he had filled up his allotment of free web-hosting space, there was the no-less-irritating dailygrind.8m.com domain. The sites remain today as shaky internet relics--a low-tech, unnavigable template; dated fashion and bike parts; youthful faces; and tricks we probably wouldn't bother archiving today. Ben could have taken the sites down, but he chose instead to leave them up as tributes to the happy years documented within.

All nostalgia aside, we were riding our hardest, truly, and I think it shows, on some level. No, that's not Adobe Aftereffects--that's authentic third-generation analog videotape shot with a VHS-C camcorder. To fully appreciate, download in high-res, ~57 mb.

... Or here's the YouTube, where it will just look like normal crap YouTube:


Locations/Riders: Everett, Washington: Phil Lastname, John Lastname, Andrew Longstreet, Shay Shefflebein; St Louis, Missouri: Ryan Johnson, John Haase; Portland, Oregon: Darus Albon and Dustin Anderson; and Ben and myself, jetsetting worldwide, riding and filming. Most of these guys are featured in the new video.

Here's another video Ben and I made in 'o4 or 'o5. Different concept. Call it "street riding." At 7mb, I really think you should just download the .wmv file, but here's the YouTube, in case.


After the session, Ben and I barely managed to load the block into the back of my Oldsmobile station wagon. As it was far heavier than I could lift on my own, it remained in my car for an entire year, ruining my mileage, before I finally dumped the thing in the alley behind our house. I can't imagine someone putting in the energy that removing it would require. It's probably sitting exactly where I left it three years ago. If anyone in STL is interested, I'd be happy to provide directions. And I would hope you'd post footage of whatever ensued.